Rubber suspensions


more pictures and comments

SE110 MOUNTINGS

The SE110 is a remarkable antivibratory product : Better than 90% insulation at 1.500 rpm (25 Hz).Constant height over wide load range.Stabilised characteristics during Service Life.400 hours (...)

Vue 360° Technical data sheet (PDF - 115.3 kb) Tariffs (PDF - 271.9 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SE111 MOUNTINGS

The design of the SE111 mounting gives the following basic characteristics : Radial elasticity greater than axial elasticityThe rubber works in compression (axial), shear (radial), (...)

Vue 360° Technical data sheet (PDF - 184.8 kb) Tariffs (PDF - 578 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SE111B MOUNTINGS

The design of the SE111B elastic stops gives the following basic characteristics : Highly deformable, allowing high energies to be absorbed.Progressive absorption of energy due to the carefully (...)

Vue 360° Technical data sheet (PDF - 91.1 kb) Tariffs (PDF - 259 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SE112 MOUNTINGS

The SE112 mounting is an adjustable equipment foot comprising a circular disc bonded to a protected elastomer base. An adjustement screw is fitted into the assembly. The elastomer base has (...)

Vue 360° Technical data sheet (PDF - 71.7 kb) Tariffs (PDF - 268.6 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SE113 MOUNTINGS

The SE113 mounting comprises an elastomer pad with an anti-slip ridged surface and a threaded stud allowing accurate height adjustment of equipment. Made in two hardnesses (50 and 80 Sh) the (...)

Vue 360° Technical data sheet (PDF - 45.4 kb) Tariffs (PDF - 240.9 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SE114 MOUNTINGS

The SE114 mounting comprises one or more layers of elastomer bonded to flat, parallel metallic plates. These mountings may be cylindrical or rectangular. They are designed to withstand very high (...)

Vue 360° Technical data sheet (PDF - 206.2 kb) Tariffs (PDF - 163.6 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SE134 MOUNTINGS

The SE134 mounting is made of an elastomer coat between metal frames. It is designed to support heavy loads in compression 2,500 daNShearing : 300daNCisaillement : 300daNHardness : 60 Shore A (...)

Vue 360° Tariffs (PDF - 720.8 kb)
Commander

more pictures and comments

SE115 MOUNTINGS

The SE115 mounting comprises a conical rubber section bonded between inner and outer metal parts. Centre axis with threaded hole.Square (4 holes) or diamond base (2 holes) with clearance (...)

Vue 360° Technical data sheet (PDF - 119.8 kb) Tariffs (PDF - 249.1 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SE116 MOUNTINGS

The SE116 is a revolutionary rubber support. It is formed from two thick conical membranes, joined at their bases to create a highly elastic mounting. The design of the SE116 mounting gives the (...)

Vue 360° Technical data sheet (PDF - 125.2 kb) Tariffs (PDF - 338.2 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SE117 MOUNTINGS

The SE117 mounting comprises one piece elastomer bonded to a top and bottom plate. Top plate: smooth or threaded (welded nut) holeBottom plate: Fixing lugs or direct bearing on the groundBonded (...)

Vue 360° Technical data sheet (PDF - 143.6 kb) Tariffs (PDF - 220.8 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SE118 MOUNTINGS

The SE118 mounting comprises an annular section bonded between the inner tube and outer housing. The outer housing has a mounting flange (4 different types). The design of the SE118 mounting (...)

Vue 360° Technical data sheet (PDF - 185.7 kb) Tariffs (PDF - 357.4 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SE119 MOUNTINGS

The SE119 mounting comprises two metallic U armatures joined by two bonded rubber blocks. The design of the TRAXIFLEX mounting gives the following basic characteristics : Rubber works in (...)

Vue 360° Technical data sheet (PDF - 85.4 kb) Tariffs (PDF - 245.4 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SE130 MOUNTINGS

The SE130 mounting comprises a rubber ring bonded to a central tube. Inner tube : mild steelBonded rubber in the form of a ring at the top with a collar below which is used for fixing The design (...)

Vue 360° Technical data sheet (PDF - 74.1 kb) Tariffs (PDF - 249.8 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SE132 MOUNTINGS

Low frequency high deflection antivibration mounting available in a choice of elastomers including high damped silicone. The zinc plated mild steel metalwork is fully bonded for improved fatigue (...)

Vue 360° Technical data sheet (PDF - 65.6 kb) Tariffs (PDF - 263.2 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

Acoustic partnership

Solutions Elastomeres is a partner of de dB Stop, the web portal of acoustics : Phonic insulation (advices, case studies), absorbent materials (such as foams), application examples... Our (...)


more pictures and comments

Need some advice ?

Please do not hesitate to contact us if you require any further information E-mail : contact@devistechnique.com

SOLUTIONS ELASTOMERES - 10, rue Ferdinand - 42000 Saint-Etienne - FRANCE - Mail : contact@solutions-elastomeres.com plan du site