Metal suspensions


more pictures and comments

SE120 MOUNTINGS

The SE120 mount is made of a round metal cushion covered with an anti-slip elastomer pad on both side. It is available in two versions : A standard version with a natural frequency of 22 à 30 Hz (...)

Vue 360° Technical data sheet (PDF - 43.1 kb) Tariffs (PDF - 170.4 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SUPPORTS SEV1786

This suspension system is particularly suitable for mounting exhaust pipes from generator sets on board ship or permanently mounted in buildings. They are unaffected by aggressive chemicals, oil, (...)

Vue 360° Tariffs and technical data sheet (PDF - 191.8 kb)

more pictures and comments

SE121 MOUNTINGS

Standard SE121 mountings have a cast steel base and a resilient element made from a stainless steel wire cushion. The version H includes a cup and a levelling stud. It can also be equipped with (...)

Vue 360° Technical data sheet (PDF - 50.5 kb) Tariffs (PDF - 171 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SE122 MOUNTINGS

Low profile mountings with high static and dynamic load range : 100% 316 stainless steelNatural frequency from 15 to 18 HzDynamic load in compression : 3 gMaximum sinusoidal input at resonance : (...)

Technical data sheet (PDF - 35.7 kb) Tariffs (PDF - 160.3 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SE127 MOUNTINGS

The SE127 damper has a satin finish treated AG3 casing and mounting plate, a stainless steel centre axis. A spring and stainless steel cushion provide the resilient elements. It has four Ø 5.2 (...)

360° view (Flash - 398.3 kb) Technical data sheet (PDF - 33.6 kb) Tariffs (PDF - 228.6 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SE101 MOUNTINGS

The SE101 isolators have a cylindrical stainless steel spring, a galvanised body, an elastomer noise reduction guide and steel rings or studs depending on the model. The SE101 series has a steel (...)

Technical data sheet (PDF - 77.8 kb) Tariffs (PDF - 261.5 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SE131 MOUNTINGS

The SE131 mountings steel have a mounting plate, cover and swaged teel shaft. This mouting is available with stainless steel or mild steel zinc plated metalwork. The resilient parts are (...)

360° view (Flash - 574.2 kb) Technical data sheet (PDF - 46.1 kb) Tariffs (PDF - 174.8 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SE123 MOUNTINGS

Machine mount available with a stud or threaded hole. Top cup and stud are mild steel zinc plated.Stainless steel wire mesh cushion.Natural frequency between 15 to 20 Hz. The SE123 mounting is (...)

Technical data sheet (PDF - 42.9 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SE124 MOUNTINGS

The SE124 dampers have a cover, an AG3 mounting plate and an AU4G shaft. The assembly is chromatised. The upper and lower stainless steel cushions are the resilient elements of the mounting. It (...)

Technical data sheet (PDF - 48.6 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SE125 MOUNTINGS

The SE125 mountings have a cast iron cover and base with 4 mounting holes in the base and a central tapped hole in the cover. This series of mountings have a natural frequency between 11 and 25 (...)

Technical data sheet (PDF - 68.8 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SE126 MOUNTINGS

The SE126 range has a pressed steel casing and mounting plate and light alloy shaft. The resilient element is a stainless steel wire pad. The steel parts are painted. The V1H 751 and 752 have a (...)

Technical data sheet (PDF - 30.6 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SE128 MOUNTINGS

This range of mountings has one or two steel mounting plates depending on the model, one or several high strength steel springs, 2 light alloy rings and a stainless steel wire cushion in each (...)

Vue 360° Technical data sheet (PDF - 80.4 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

SE129 MOUNTINGS

All metal mounting comprising a stack of between one and three woven steel cushions giving a variation in natural frequency depending upon the number of cushions. This makes higher levels of (...)

Technical data sheet (PDF - 110.2 kb) Choose your support (PDF - 160.3 kb)
Commander

more pictures and comments

Acoustic partnership

Solutions Elastomeres is a partner of de dB Stop, the web portal of acoustics : Phonic insulation (advices, case studies), absorbent materials (such as foams), application examples... Our (...)


more pictures

Need some advice ?

Please do not hesitate to contact us if you require any further information E-mail : contact@devistechnique.com

SOLUTIONS ELASTOMERES - 10, rue Ferdinand - 42000 Saint-Etienne - FRANCE - Mail : contact@solutions-elastomeres.com plan du site