50.02.06 (Jaune)
Highly malleable bumpers on 3 axles for a better impact dampening or during a vertical displacement at a level variation while loading or unloading trucks.
Highly malleable bumpers on 3 axles for a better impact dampening or during a vertical displacement at a level variation while loading or unloading trucks.
Its geometry increases the effect of a simple rubber package, a flexible natural rubber with a high dampening ratio.
Its blade geometry is supported by a 10 mm thick heel that allows it to fit into all flat, arched or angle forms (protection of forklifts, handling systems, round or parallelepipedal posts...).
Fixing is ensured by two 8 mm diameter screws. The ends, at fixing points are reinforced by two molded and vulcanized E 24 steel washers (diameter 80 mm x thickness 3 mm).
Il n'y a aucun avis pour le moment.
Made up of compact molded rubber, the quay and handling bumper protects buildings against impact or shock risks that occur during goods loading or unloading.
The armoured shield is intended to protect walls and door faces Resistant to shocks and break Guarantees great impact absorption and a good resistance to distortion
The bumper post is intended to highlight and protect: Machine or wall corners against the shocks provoked by handling equipments Entries Column basis
The shock bumper is made up of a galvanized metallic reinforcement (80x80 mm), covered with semi-flexible rubber elements; it is composed of 50 mm thick easy interchangeable blades Ground fixing thanks to 2 M16 screws Efficient industrial protection Creation of protection areas