Dalles et planchers flottants

SE110 MOUNTINGS

The Paulstradyn mount provides vibration attenuation greater than 90% at 1,500 rpm (25 Hz), with a high-performance, consistent range and stabilised characteristics. Rubber Suspensions Paulstra Range

SE111 MOUNTINGS

The SE111 anti-vibration mounting , better known as Radiaflex in the Paulstra range, is a cylindrical elastomer mounting. These mountings are easy to install and compatible with various fixing configurations. They are designed to reduce vibrations generated under shear loading in the radial direction or compression in the axial direction .   Rubber Suspensions Paulstra Range

SE128 MOUNTINGS

The SE128 mounting is a metal spring mounting . Depending on the model, it consists of one or two steel base plates, one or more high-strength steel springs, two light-alloy connecting washers, and a stainless steel wire mesh cushion inside each spring.   Metal Suspensions Paulstra Range

Spring SE145VSH

Super-Resilient Acoustic

The Super Resilient rubber acts as an efficient acoustic mat. It reduces the transmission of vibratory energy, especially in multi-stage constructions, detached houses and industrial buildings.

Masses Lourdes (Standard)

The heavy mass range is made up of viscoelastic bitumen that is used to deaden vibrations and provision of mass, both in the building sector and in the industrial environment.

Masses Lourdes Performance

Regupol Sound 12

REGUPOL Sound 12 is an acoustic and anti-vibration underlay made from polyurethane and elastomer. Installed beneath a floating screed, it helps reduce the transmission of impact noise through floors. Laboratory tests show an improvement in impact sound insulation of 34 dB with one layer and 37 dB with two layers , depending on the tested configuration. Available in 1,200 × 1,000 mm panels , with a thickness of 17 mm and custom cutting available . It can also be incorporated into anti-vibration systems beneath concrete equipment bases, subject to project-specific assessment.

Regupol Sound and Drain 22

The REGUPOL Sound and Drain 22 is a resilient acoustic drainage mat designed to reduce impact noise and vibration transmission through terraces, balconies, loggias and roof terraces . Its profiled underside promotes rainwater drainage, while its geotextile upper surface helps protect the waterproofing system. Available in 10,000 × 1,250 mm rolls , with a thickness of 15 mm and custom cutting available for strips, discs and pads. Tested installations achieve up to 37 dB impact sound reduction , depending on the floor assembly. Plastic adjustable terrace pedestals are not included.

Super-Resilient Strips

The Super Resilient rubber acts as an efficient acoustic mat. It reduces the transmission of vibratory energy, especially in multi-stage constructions, detached houses and industrial buildings.

Super-Resilient Terrace Paver Discs

The Super Resilient rubber acts as an efficient acoustic mat. It reduces the transmission of vibratory energy, especially in multi-stage constructions, detached houses and industrial buildings.

Regufoam® Vibration 150 Plus

Regufoam® Vibration 190 Plus

Regufoam® Vibration 220 Plus

Regufoam® Vibration 270 Plus

Regufoam® Vibration 300 Plus

Regufoam® Vibration 400 Plus

Regufoam® Vibration 510 Plus

Regufoam® Vibration 570 Plus

Regufoam® Vibration 680 Plus

Regufoam® Vibration 740 Plus

Regufoam® Vibration 810 Plus

Regufoam® Vibration 990 Plus