What is the SE220 anti-vibration mounting?
The Paulstra SE220 anti-vibration mounting is a two-part mounting consisting of a chloroprene elastomer element bonded to a central tube.
Available in five elastomer grades, it is designed to withstand axial and radial loads while reducing the transmission of vibrations and structure-borne noise.
Its natural frequency ranges from 10 to 15 Hz depending on the reference, load and mounting configuration.
How does the SE220 mounting work?
The elastomer element supports axial and radial loads and provides similar stiffness in both directions. This allows vibrations to be isolated in several mounting positions.
Its design also improves pull-out resistance. With a suitable washer, the installation can also incorporate an anti-rebound effect.
What are the advantages of the SE220 mounting?
✅ Multidirectional isolation: supports both axial and radial loads.
✅ Good structure-borne noise isolation: reduces vibrations transmitted to the structure.
✅ Resistant chloroprene: good resistance to oils and common operating conditions.
✅ Wide load range: five sizes and five grades allow the mounting to be adapted to the installation.
What applications is the SE220 mounting suitable for?
The SE220 is suitable for stationary or on-board installations, including pumps, electric or combustion engines, transmissions, machine cabs, radiators and other equipment subjected to vibrations.
How can the SE220 mounting be installed?
Chassis mounting in compression
![SE220 chassis mounting in compression 1]()
![SE220 chassis mounting in compression 2]()
Chassis mounting in shear
![SE220 chassis mounting in shear 1]()
![SE220 chassis mounting in shear 2]()
How to choose your SE220 mounting?
- Load: take into account the axial and radial loads applied to each mounting.
- Interface: load capacity depends on the E1 or E2 mounting thickness.
- Grade: five elastomer grades are available to adapt the stiffness to the load.
- Installation: an anti-rebound washer can be used to secure the installation.
What are the dimensions of the SE220 mounting?
The diagram below identifies the different dimensions and interface thicknesses used for installation.
![Paulstra SE220 mounting dimensional drawing]()
| Paulstra Reference |
Barry Controls Reference |
Ø A (mm) |
Ø B (mm) |
Ø C (mm) |
D (mm) |
F (mm) |
Ø G (mm) |
R (mm) |
Weight (g) |
| 530903 11 to 15 |
22001 11 to 15 |
10.4 |
33.2 |
20.1 |
12.3 |
31.7 |
19 |
1 |
43 |
| 530903 21 to 25 |
22002 11 to 15 |
13.5 |
47.7 |
33 |
19.8 |
49.2 |
31.7 |
1.5 |
142 |
| 530903 31 to 35 |
22003 11 to 15 |
16.7 |
64.8 |
40.1 |
22.8 |
61.7 |
38.1 |
2.3 |
313 |
| 530903 41 to 45 |
22004 11 to 15 |
23.8 |
88.9 |
58.4 |
25.4 |
73.1 |
57.1 |
3 |
670 |
| 530903 51 to 55 |
22005 11 to 15 |
27 |
123.9 |
64.8 |
31.7 |
85.8 |
63.5 |
3 |
1,306 |
Which washers should be used with the SE220 mounting?
Galvanised steel anti-rebound washers are recommended to secure the installation. They are not supplied by Paulstra. Recommended material: S235 (E24) steel or equivalent, with Rm = 340 MPa.
![SE220 mounting anti-rebound washer installation and dimensions]()
| Reference |
Outside Ø (mm) |
Inside Ø (mm) |
Thickness (mm) |
| 530903 11 to 15 |
39.6 |
10.3 |
2.2 |
| 530903 21 to 25 |
54.1 |
13.5 |
3.4 |
| 530903 31 to 35 |
71.3 |
16.7 |
4.7 |
| 530903 41 to 45 |
98.5 |
23.8 |
6.3 |
| 530903 51 to 55 |
133.3 |
27 |
9.5 |
What load can the SE220 mounting support?
The permissible loads depend on the reference and the E1 or E2 interface thickness.
| Ref. |
Colour Code |
E1 Axial / Radial (daN) |
F0 E1 (Hz) |
E1 (mm) |
E2 Axial / Radial (daN) |
F0 E2 (Hz) |
E2 (mm) |
| 530903 11 |
Red / White |
18 / 9 |
15 |
9.5 |
18 / 9 |
15 |
9.5 |
| 530903 12 |
Yellow / White |
40 / 13 |
15 |
9.5 |
40 / 13 |
15 |
9.5 |
| 530903 13 |
Green / White |
63 / 18 |
15 |
9.5 |
63 / 18 |
15 |
9.5 |
| 530903 14 |
Blue / White |
113 / 22 |
15 |
9.5 |
113 / 22 |
15 |
9.5 |
| 530903 15 |
Purple / White |
136 / 27 |
15 |
9.5 |
136 / 27 |
15 |
9.5 |
| 530903 21 |
Red / White |
59 / 22 |
12 |
14 |
27 / 18 |
15 |
12.5 |
| 530903 22 |
Yellow / White |
79 / 29 |
12 |
14 |
54 / 36 |
15 |
12.5 |
| 530903 23 |
Green / White |
109 / 40 |
12 |
14 |
72 / 56 |
15 |
12.5 |
| 530903 24 |
Blue / White |
172 / 75 |
12 |
14 |
118 / 81 |
15 |
12.5 |
| 530903 25 |
Purple / White |
286 / 127 |
12 |
14 |
172 / 127 |
15 |
12.5 |
| 530903 31 |
Red / White |
95 / 40 |
11 |
22 |
40 / 31 |
15 |
19 |
| 530903 32 |
Yellow / White |
159 / 63 |
11 |
22 |
68 / 47 |
15 |
19 |
| 530903 33 |
Green / White |
222 / 102 |
11 |
22 |
102 / 72 |
15 |
19 |
| 530903 34 |
Blue / White |
390 / 175 |
11 |
22 |
147 / 111 |
15 |
19 |
| 530903 35 |
Purple / White |
604 / 313 |
11 |
22 |
222 / 163 |
15 |
19 |
| 530903 41 |
Red / White |
122 / 61 |
10 |
28.5 |
68 / 50 |
15 |
25.5 |
| 530903 42 |
Yellow / White |
231 / 104 |
10 |
28.5 |
136 / 100 |
15 |
25.5 |
| 530903 43 |
Green / White |
350 / 156 |
10 |
28.5 |
181 / 136 |
15 |
25.5 |
| 530903 44 |
Blue / White |
531 / 268 |
10 |
28.5 |
227 / 181 |
15 |
25.5 |
| 530903 45 |
Purple / White |
984 / 443 |
10 |
28.5 |
277 / 263 |
15 |
25.5 |
| 530903 51 |
Red / White |
518 / 109 |
10 |
32 |
136 / 68 |
15 |
25.5 |
| 530903 52 |
Yellow / White |
877 / 154 |
10 |
32 |
227 / 100 |
15 |
25.5 |
| 530903 53 |
Green / White |
1,172 / 277 |
10 |
32 |
318 / 136 |
15 |
25.5 |
| 530903 54 |
Blue / White |
1,609 / 404 |
10 |
32 |
409 / 213 |
15 |
25.5 |
| 530903 55 |
Purple / White |
2,072 / 640 |
10 |
32 |
545 / 300 |
15 |
25.5 |
How does the axial compression load vary?
![Paulstra SE220 mounting load deflection curves]()
Discover Paulstra anti-vibration mountings
Complete your anti-vibration isolation
To complement the vibration isolation of a machine or chassis, discover our Super Resilient and Regufoam anti-vibration materials.
To also reduce noise, discover our range of acoustic foams.
Finally, discover the complete Hutchinson Paulstra range.
Need help choosing your SE220 mounting?
Not sure about the reference, axial or radial load, E1/E2 interface or mounting configuration? Our team can help you select the right solution.
Have a project? Contact us!