SE122 MOUNTINGS
Low profile mountings with high static and dynamic load range :
- 100% 316 stainless steel
- Natural frequency from 15 to 18 Hz
- Dynamic load in compression : 3 g
| Prix dégressifs | |
|---|---|
| 11 unités | 269,83 € HT |
| 11 unités | 270,08 € HT |
| 11 unités | 695,83 € HT |
| 26 unités | 256,32 € HT |
| 26 unités | 256,56 € HT |
| 26 unités | 661,02 € HT |
Low profile mountings with high static and dynamic load range :
- 100% 316 stainless steel
- Natural frequency from 15 to 18 Hz
- Dynamic load in compression : 3 g
- Maximum sinusoidal input at resonance : ± 0.4 mm
Anti-vibration mounting for presses and machine tools without the need to fix or grout in position.
Our range of acoustic foams can be ideally combined with the antivibratory properties of rubber mountings in order to reduce noise nuisance.
Bitumen heavy masses can also be used to stop the vibrations produced by thin sheets.
Our Super-Resilient material can be used as a supplement to disconnect conductive elements (slabs, rigid stands, pipings...). Made up of rubber particles that are linked between them, this flexible material benefits from the dampening properties of elastomers and is really good value for money.
- WEB TRUST SEAL delivered by CHAMBER TRUST INTERNATIONAL
The Agro GRIPSOL takes its pseudonym from the French word « agro-alimentaire » that refers to the food processing industry; it is made with an elastomer that meets general food standards and resists animal fats.
The polyurethane has remarkable properties for the industrial environment: Great abrasion resistance. Great cutting resistance. Dampening material.
The SE50AL-ML foam is an alveolar acoustic foam made up of polyurethane (2,000x1400 mm) and which is 50mm thick (a 20 mm heel/30 mm spikes). A PVC heavy mass (5 Kg/m2) is stuck between the foam and the adhesive in order to improve its transmission performances.
Standard SE121 mountings have a cast steel base and a resilient element made from a stainless steel wire cushion.
The SE120 mount is made of a round metal cushion covered with an anti-slip elastomer pad on both side.
Machine mount available with a stud or threaded hole. Top cup and stud are mild steel zinc plated. Stainless steel wire mesh cushion. Natural frequency between 15 to 20 Hz.
