SE131 MOUNTINGS
The SE131 mountings steel have a mounting plate, cover and swaged teel shaft.
This mouting is available with stainless steel or mild steel zinc plated metalwork.
The resilient parts are stainless steel wire cushions. The steel parts are zinc plated.
| Prix dégressifs | |
|---|---|
| 11 unités | 150,05 € HT |
| 11 unités | 207,15 € HT |
| 11 unités | 196,11 € HT |
| 11 unités | 127,53 € HT |
| 11 unités | 141,22 € HT |
| 11 unités | 227,16 € HT |
| 11 unités | 257,40 € HT |
| 11 unités | 217,83 € HT |
| 11 unités | 166,28 € HT |
| 11 unités | 134,28 € HT |
| 11 unités | 243,73 € HT |
| 11 unités | 196,29 € HT |
| 11 unités | 127,41 € HT |
| 11 unités | 157,98 € HT |
| 11 unités | 230,72 € HT |
| 26 unités | 196,79 € HT |
| 26 unités | 121,03 € HT |
| 26 unités | 134,15 € HT |
| 26 unités | 206,90 € HT |
| 26 unités | 127,59 € HT |
| 26 unités | 186,30 € HT |
| 26 unités | 142,50 € HT |
| 26 unités | 219,19 € HT |
| 26 unités | 150,14 € HT |
| 26 unités | 231,51 € HT |
| 26 unités | 157,98 € HT |
| 26 unités | 244,50 € HT |
| 26 unités | 215,83 € HT |
| 26 unités | 121,15 € HT |
| 26 unités | 186,48 € HT |
The SE131 mountings steel have a mounting plate, cover and swaged teel shaft.
This mouting is available with stainless steel or mild steel zinc plated metalwork.
The resilient parts are stainless steel wire cushions. The steel parts are zinc plated.
The SE131 mountings have a natural frequency of between 12 and 18 Hz and are designed for suspending rotating machines, electronic cabinets, pipes, air conditioning systems, etc. Its entire metal construction means that its characteristics do not deteriorate with time and it maintains its height under load, even in the most severe ambient conditions and temperatures.
The shape of the armature and upper cushion provide high radial performance and a structural strength of 3 g, making it suitable for mounting on board equipment on military ground vehicles and ships.
Our range of acoustic foams can be ideally combined with the antivibratory properties of rubber mountings in order to reduce noise nuisance.
Bitumen heavy masses can also be used to stop the vibrations produced by thin sheets.
Our Super-Resilient material can be used as a supplement to disconnect conductive elements (slabs, rigid stands, pipings...). Made up of rubber particles that are linked between them, this flexible material benefits from the dampening properties of elastomers and is really good value for money.
- WEB TRUST SEAL delivered by CHAMBER TRUST INTERNATIONAL
The Super Resilient rubber acts as an efficient acoustic mat. It reduces the transmission of vibratory energy, especially in multi-stage constructions, detached houses and industrial buildings.
Mainly used in the automobile sector, the metal sheets, coated with a 3.5 mm thick polyurethane are interesting when parts should be protected against scratches or impacts.
The SE30FL foam is a flat acoustic foam made up of polyurethane (2,000x1,000 mm) and which is 30 mm thick. Its black polyurethane film protects it from dampness, dust, oil emissions, which is a deciding factor in several situations.
Machine mount available with a stud or threaded hole. Top cup and stud are mild steel zinc plated. Stainless steel wire mesh cushion. Natural frequency between 15 to 20 Hz.
The SE120 mount is made of a round metal cushion covered with an anti-slip elastomer pad on both side.
This suspension system is particularly suitable for mounting exhaust pipes from generator sets on board ship or permanently mounted in buildings.
Low profile mountings with high static and dynamic load range : 100% 316 stainless steel Natural frequency from 15 to 18 Hz Dynamic load in compression : 3 g