Gripsol Blue 11: 11 mm Anti-Vibration Pad

Fast delivery

Secure paiement

Quality products

Customer service

Gripsol Blue 11

Name: Gripsol Blue 11
Brand: Solutions Élastomères
SKU: 50.00.52
Price: 302.81 EUR
Availability: InStock

Reference : 50.00.52

The Gripsol Blue 11 is a self-gripping anti-vibration pad designed to reduce vibrations from light industrial machinery, particularly where occasional oil splashes may occur, subject to compatibility with the fluids present.

Dimensions: 500 × 500 mm

Thickness: 11 mm

Colour: Blue

Suitable for milling machines, injection moulding presses, compressors, generators and saws, particularly equipment with rotating movements and low vibration amplitudes. This vibration-damping support can be cut to the required dimensions according to the loads to be supported.

View the full range

Learn more

Gripsol size (mm)

€252.34 tax excl. | €302.81 TTC

Unit price : €252.34 tax excl. | €302.81 tax incl.

Sheet(s)

Description

Gripsol Blue 11: anti-vibration pad for light industrial machinery

The Gripsol Blue 11 is a self-gripping vibration-damping support designed to reduce the transmission of mechanical vibrations to floors and surrounding structures.

This SBR / NBR elastomer anti-vibration pad is recommended for light industrial machinery, particularly equipment with rotating movements and low vibration amplitudes.

With a thickness of 11 mm, an acceptable load range of 0.5 to 8 kg/cm² and a natural frequency of 11 to 18 Hz, it provides vibration isolation for various applications, subject to appropriate sizing.

Gripsol Blue 11 is intended for dry or oily environments, including installations where occasional oil splashes may occur. However, compatibility with the oils and other fluids present must be checked according to the operating conditions.

Close-up of the Gripsol Blue anti-vibration pad structure

Close-up of the Gripsol Blue pad cross-section

Benefits of Gripsol Blue 11

Vibration isolation

Reduces vibrations transmitted to support points and surrounding structures.

Installation of a self-gripping Gripsol support

Easy installation

A self-gripping support designed for easy installation without additional mechanical fasteners in suitable configurations.

Custom cutting of Gripsol anti-vibration supports

Cutting and customisation

Manual cutting is possible with a suitable blade. Our custom cutting workshop can also assess your specific requirements.

Made in France

A French-made anti-vibration solution for industrial applications.

Technical specifications of Gripsol Blue 11

Find the main dimensional and mechanical characteristics of this 11 mm thick anti-vibration support.

Characteristic	Value
SE reference	50.00.52
Colour	Blue
Dimensions	500 × 500 mm
Thickness	11 mm
Material	SBR / NBR
Intended environment	Dry or oily, subject to chemical compatibility
Acceptable load	0.5 to 8 kg/cm²
Natural frequency	11 to 18 Hz
Compressive stress at 10% strain	1.3 kg/cm²
Compressive stress at 20% strain	10 kg/cm²
Elongation	457%
Net weight	3.40 kg
Installation method	Self-gripping
Country of manufacture	France

Compression stress values and the acceptable load range are different technical characteristics. Proper sizing must take into account the support area, load distribution and actual operating conditions.

Important: compatibility with oils and chemicals

Gripsol Blue 11 is intended for installations in dry or oily environments. However, this does not guarantee compatibility with every fluid. Certain oils and chemical substances are listed among the material's limitations in its technical documentation.

Before using this support in applications involving regular exposure to oils, fuels, solvents or chemicals, we recommend contacting our technical team to check compatibility with your application.

Applications of Gripsol Blue 11

Gripsol Blue 11 is recommended for light industrial machinery, particularly rotating equipment with low vibration amplitudes.

Milling machines and machine tools: reducing vibration transmission to floors and supporting structures.
Rubber or plastic injection moulding machines: limiting mechanical stresses generated during operation.
Compressors: damping vibrations produced by moving mechanical components.
Generators: isolating vibrations transmitted to supporting structures.
Saws and production equipment: reducing operating vibrations according to equipment loads and movements.

How to install Gripsol Blue 11?

Proper installation requires determining the actual applied loads, the necessary contact area and the installation conditions for the self-gripping support.

1. Calculate the load per support point

Determine the equipment weight and how it is distributed between the different support points, taking into account the forces generated during operation.

2. Adjust the dimensions

Determine the required contact area according to the permissible load. Cutting with a sharp, high-quality utility knife is possible, although considerable effort may be needed due to the material structure.

3. Position the supports

Prepare the supporting surfaces and follow the self-gripping procedure described in the installation instructions. Remove any protective films at the appropriate stage, where applicable, then check the stability of the installation.

Need custom-cut Gripsol pads?

Our workshop can assess the production of supports tailored to your installation dimensions, helping you avoid difficult manual cutting and achieve accurate results.

Contact us to discuss your requirements and request a quotation.

For further details on technical performance and installation, consult the technical data sheet and Gripsol installation instructions available in the Documentation tab of this product page.

Looking for a thicker model with a different load range? Discover Gripsol Blue 15 and compare the technical characteristics of each model.

Complementary acoustic and vibration isolation solutions

Vibration-damping supports can be combined with materials designed to reduce airborne noise or structure-borne vibration transmission in other parts of an installation.

Acoustic foams

Our convoluted acoustic foams help absorb airborne noise and can complement rubber anti-vibration mounts in projects aimed at reducing noise and vibration.

Bitumen damping sheets

Our bitumen heavy mass sheets can help damp vibrations in certain components, including thin sheet metal and machine enclosures.

Resilient materials for vibration decoupling

To reduce vibration transmission through concrete slabs, machine bases and floors, several technical materials can complement anti-vibration mounts according to the requirements of each installation.

Super Resilient

Resilient materials for acoustic insulation and vibration decoupling.

Explore the range

Regufoam Vibration

Technical elastomers designed for vibration isolation under load.

Explore the range

REGUPOL Sound 12

Resilient acoustic underlay for impact sound insulation beneath screeds.

Discover the product

REGUPOL Sound and Drain 22

Resilient drainage material intended for outdoor installations.

Discover the product

Download

Download PDF documents

Fiche Technique - 1.2MB

Tarifs - 617.07KB

Article Presse 1 - 614.39KB

Mode d emploi Gripsol - 1.14MB

Technical data sheet

Accessoires

SE120 MOUNTINGS

The SE120 anti-vibration mounting features a cylindrical stainless steel wire cushion. Both sides are covered with anti-slip rubber. Metal Suspensions Paulstra Range

€39.34 HT

€47.21TTC

Resilient Acoustic Anti-vibration Mat Purchase / Sale

Super-Resilient Acoustic

The Super Resilient rubber acts as an efficient acoustic mat. It reduces the transmission of vibratory energy, especially in multi-stage constructions, detached houses and industrial buildings.

€70.09 HT

€84.11TTC

Gripsol Blue 15

The Gripsol Blue 15 is a self-gripping anti-vibration pad designed to reduce vibrations from medium-weight industrial machinery operating in dry or oil-exposed environments, subject to compatibility with the fluids present. Dimensions: 500 × 500 mm Thickness: 15 mm Colour: Blue Suitable for injection moulding machines, milling machines, compressors, generators and pumping installations. This vibration-damping pad can be cut to the required dimensions according to the loads to be supported. View the full range

€344.42 HT

€413.30TTC