Gripsol Green 15

The Gripsol Green 15 is a self-gripping vibration-damping support specifically designed to reduce the transmission of mechanical vibrations and impacts generated by equipment with vertical movements.

This CR / NBR elastomer anti-vibration pad is particularly suitable for cutting presses, stamping presses and shearing machines, where vertical dynamic loads must be taken into account.

With a thickness of 15 mm, an acceptable load range of 15 to 20 kg/cm² and an indicative natural frequency of 10 to 18 Hz, it provides a damping solution that must be correctly sized according to the actual forces and operating characteristics of the installation.

Gripsol Green 15 is intended for dry or oily environments. However, compatibility with the fluids present must be checked, particularly in applications involving regular contact with oils or chemicals.

Close-up of the Gripsol Green pad cross-section

1. Assess the load per support point

Determine the equipment weight and how it is distributed between the support points, taking into account the vertical forces generated during operating cycles.

2. Adjust the dimensions

Determine the required support area according to the selected sizing parameters. Cutting with a sharp, high-quality utility knife is possible, although considerable effort may be needed due to the structure of the material.

3. Position the supports

Prepare the supporting surfaces and follow the self-gripping procedure described in the installation instructions. Remove any protective films at the appropriate stage, where applicable, then check the stability of the assembly.

SE120 metal anti-vibration mounts

Our SE120 circular anti-vibration mounts, manufactured from stainless steel wire, provide an alternative solution for certain installations subject to significant mechanical stresses.

They may be considered when mechanical, thermal or chemical conditions require a different type of support, subject to appropriate sizing.

Acoustic foams

Our convoluted acoustic foams help absorb airborne noise and can complement rubber anti-vibration mounts in projects aimed at reducing noise and vibration.

Bitumen damping sheets

Our bitumen heavy mass sheets can help damp vibrations in certain components, including thin sheet metal and machine enclosures.

Super Resilient

Resilient materials for acoustic insulation and vibration decoupling.

Explore the range

Regufoam Vibration

Technical elastomers designed for vibration isolation under load.

Explore the range

REGUPOL Sound 12

Resilient acoustic underlay for impact sound insulation beneath screeds.

Discover the product

REGUPOL Sound and Drain 22

Resilient drainage material intended for outdoor installations.

Discover the product