Armoires électriques

The SE110 is a remarkable antivibratory product : Better than 90% insulation at 1.500 rpm (25 Hz). Constant height over wide load range. Stabilised characteristics during Service Life.

The design of the SE111 mounting gives the following basic characteristics : Radial elasticity greater than axial elasticity The rubber works in compression (axial), shear (radial), compression/shear according to the fixing method

The SE113 mounting comprises an elastomer pad with an anti-slip ridged surface and a threaded stud allowing accurate height adjustment of equipment.

The SE117 mounting comprises one piece elastomer bonded to a top and bottom plate.

The SE137 mount comprises two concentric metallic parts joined by a bonded, perforated rubber ring

The SE131 mountings steel have a mounting plate, cover and swaged teel shaft. This mouting is available with stainless steel or mild steel zinc plated metalwork. The resilient parts are stainless steel wire cushions. The steel parts are zinc plated.

This range of mountings has one or two steel mounting plates depending on the model, one or several high strength steel springs, 2 light alloy rings and a stainless steel wire cushion in each spring.

The SE126 range has a pressed steel casing and mounting plate and light alloy shaft. The resilient element is a stainless steel wire pad.

This suspension system is particularly suitable for mounting exhaust pipes from generator sets on board ship or permanently mounted in buildings.

The design of the SE111B elastic stops gives the following basic characteristics : Highly deformable, allowing high energies to be absorbed. Progressive absorption of energy due to the carefully designed shape.