What is the SE137 anti-vibration mounting?
The Paulstra SE137 anti-vibration mounting consists of two concentric metal parts connected by a perforated bonded rubber disc.
Designed for low loads in compression and tension, it provides vibration isolation for small and sensitive equipment.
Its natural frequency ranges from 11 to 15 Hz depending on the reference, hardness and applied load.
How does the SE137 mounting work?
The geometry of the rubber disc provides approximately equal elasticity in all directions.
The SE137 is therefore an equi-frequency mounting, making it particularly suitable for equipment subjected to vibrations along several axes.
What are the advantages of the SE137 mounting?
✅ Equi-frequency behaviour: similar elasticity in all directions.
✅ Suitable for low loads: operating ranges from 0.25 to 6 daN depending on the reference.
✅ Compression and tension: suitable for different loading directions.
✅ Compact design: particularly suitable for small devices and sensitive equipment.
What applications is the SE137 mounting suitable for?
The SE137 is particularly suitable for suspending small measuring and recording devices, equipment installed on mobile assemblies and machine-tool controls.
How to choose your SE137 mounting?
- Load: select a reference whose operating range corresponds to the applied load.
- Hardness: types I.20 and I.30 are available in 45 or 60 Shore A.
- Dimensions: select type R, I.20 or I.30 according to the available space and mounting configuration.
- Stability: correctly position the equipment's centre of gravity in relation to the suspension.
What are the dimensions of the SE137 mounting?
The diagram below identifies the different dimensions of the available versions.
![Paulstra SE137 mounting dimensional drawing]()
| Type |
Fig. |
Reference |
Hardness (ShA) |
Ø A (mm) |
B (mm) |
Ø C (mm) |
D (mm) |
Ø E (mm) |
F (mm) |
G (mm) |
H (mm) |
J (mm) |
Weight (g) |
| R |
A |
552428 |
50 |
28 |
8 |
4.2 |
36 |
3.2 |
44 |
4 |
3 |
— |
9 |
| I.20 |
B |
552231 |
45 - 60 |
25.4 |
10.3 |
4.2 |
25.4 |
3.6 |
31.8 |
4.2 |
1 |
4.3 |
10 |
| I.30 |
B |
552241 |
45 - 60 |
38.1 |
15.9 |
6.2 |
34.9 |
4.2 |
44.5 |
7.3 |
— |
7.3 |
30 |
What load can the SE137 mounting support?
| Reference |
Type |
Hardness (ShA) |
Operating Range (daN) |
Max. Deflection (mm) |
| 552428 |
R |
50 |
0.25 to 1 |
3 |
| 552231 |
I.20 |
45 |
0.50 to 2 |
3 |
| 552231 |
I.20 |
60 |
0.75 to 3 |
2.5 |
| 552241 |
I.30 |
45 |
1 to 4 |
3 |
| 552241 |
I.30 |
60 |
1.5 to 6 |
2 |
The natural frequencies indicated apply to the maximum loads within the operating ranges. The mountings also feature markings to identify their hardness.
How to install an SE137 mounting correctly?
To prevent tipping or tilting, the mounting arrangement should position the centre of gravity of the suspended equipment close to the geometrical centre of the suspension.
![Paulstra SE137 anti-vibration mounting installation]()
Discover Paulstra anti-vibration mountings
Complete your anti-vibration isolation
To complement the vibration isolation of your equipment, discover our Super Resilient and Regufoam anti-vibration materials.
When the installation also requires noise reduction, discover our range of acoustic foams.
Finally, discover the complete Hutchinson Paulstra range.
Need help choosing your SE137 mounting?
Not sure about the reference, hardness, load or mounting configuration? Our team can help you select the right mounting for your equipment.
Have a project? Contact us!