Moteurs, moteurs de bateau
- Armoires électriques
- Broyeurs
- Cabines d'engin
- Capotages
- Climatisations - CTA
- Compresseurs
- Containers et emballages
- Cribles et trémies
- Dalles et planchers flottants
- Equipements informatiques
- Groupes électrogènes
- Machines-outils
- Matériels de contrôle
- Matériels embarqués
- Matériels de laboratoires
- Moteurs, moteurs de bateau
- Mur
- Plafonds
- Pompes
- Ponts roulants
- Presses et cisailles
- Transformateurs
- Tuyauteries
- Tables Vibrantes
- Ventilateurs
Low frequency high deflection antivibration mounting available in a choice of elastomers including high damped silicone.
The SE131 mountings steel have a mounting plate, cover and swaged teel shaft. This mouting is available with stainless steel or mild steel zinc plated metalwork. The resilient parts are stainless steel wire cushions. The steel parts are zinc plated.
A flexible bush has an elastomeric element enclosed between an outer sleeve and a centre axis intended to replace a greased bush.
A flexible fixing resistant to oils, the majority of solvents and ageing
Flexible element made up of a variable number of flexible studs depending on the torque to be transmitted : Solid natural rubber blocks in the form of a truncated cone Internal armature bonded to the rubber
Flexible element : Precompressed natural rubber Bonded metal reinforcing mountings Precompression band (to be removed after installation)
Flexible element : Metallic bobbins linked together by rayon fibres The whole unit is potted in natural rubber and is hexagonal
There are two variations of the SE151 coupling : hollow hub and solid hub : Flexible element : Formed of solid natural rubber External steel surround, bonded to the rubber
The SE150 coupling is designed with the following features : Push fit assembly Compact, smooth cylindrical shape without protrusions The flexible element is precompressed during assembly, which extends the range of operating conditions where the rubber is not subject to tension
The SE150 coupling is designed with the following features : Push fit assembly Compact, smooth cylindrical shape without protrusions The flexible element is precompressed during assembly, which extends the range of operating conditions where the rubber is not subject to tension
This range of mountings has one or two steel mounting plates depending on the model, one or several high strength steel springs, 2 light alloy rings and a stainless steel wire cushion in each spring.
The SE126 range has a pressed steel casing and mounting plate and light alloy shaft. The resilient element is a stainless steel wire pad.
