SE123 MOUNTINGS

What is the SE123 anti-vibration mounting?

The Hutchinson Paulstra SE123 is an extra-low-profile anti-vibration machine foot designed for low-load equipment.

It consists of a zinc-plated steel cup and screw combined with a stainless steel wire mesh cushion providing the resilient function.

Two configurations are available:

• SP55*W: mounting with threaded stud.
• SP56*W: mounting with tapped hole.
• Natural frequency: from 15 to 20 Hz.
• Static load: up to 225 daN depending on the reference.
• Manufactured in: France.

What are the advantages of the SE123?

✅ Very low profile: extra-flat design suitable for installations with limited available height.

✅ Two fixing types: choice between a threaded stud version and a tapped-hole version.

✅ Vibration isolation: natural frequency between 15 and 20 Hz.

✅ Low loads: several load levels available up to 225 daN per mounting.

✅ Stainless steel wire mesh cushion: resilient element suitable for industrial applications.

What applications is the SE123 suitable for?

The SE123 is designed for low-load equipment. Paulstra particularly recommends it for machine tools, inspection equipment, laboratory equipment, and presses or shears. It is particularly suitable for rotating machines operating above 2,500 rpm.

What is the difference between the SP55 and SP56 mountings?

SP56*W with tapped hole

Fixing by tapped hole.

SP55*W with threaded stud

Fixing by threaded stud.

SE123 dimensions and references

For each load level, the mounting dimensions remain identical regardless of the fixing type selected. Only the configuration changes between the SP55*W threaded stud version and the SP56*W tapped-hole version.

How to choose your SE123 mounting?

Selection is carried out in two steps: first determine the load supported by each foot, then choose the fixing type best suited to your installation.

• 60 daN: SP550W with threaded stud or SP560W with tapped hole.
• 100 daN: SP551W with threaded stud or SP561W with tapped hole.
• 150 daN: SP552W with threaded stud or SP562W with tapped hole.
• 225 daN: SP553W with threaded stud or SP563W with tapped hole.

View the SE123 technical data sheet

Complete your anti-vibration isolation

Discover also our Super Resilient and Regufoam solutions, as well as the complete Hutchinson Paulstra range.

Video

Need advice?

Our technical team can help you determine the SE123 mounting best suited to the load of your equipment and the required fixing type.

Have a project? Contact us!