Broyeurs

The SE110 is a remarkable antivibratory product : Better than 90% insulation at 1.500 rpm (25 Hz). Constant height over wide load range. Stabilised characteristics during Service Life.

The SE117 mounting comprises one piece elastomer bonded to a top and bottom plate.

The SE131 mountings steel have a mounting plate, cover and swaged teel shaft. This mouting is available with stainless steel or mild steel zinc plated metalwork. The resilient parts are stainless steel wire cushions. The steel parts are zinc plated.

The SE116 is a revolutionary rubber support. It is formed from two thick conical membranes, joined at their bases to create a highly elastic mounting.

he SE114 mounting comprises one or more layers of elastomer bonded to flat, parallel metallic plates. These mountings may be cylindrical or rectangular. They are designed to withstand very high compressive loads. The range of mechanical characteristics is governed by the hardness of the rubber and the number of intermediate metallic plates.

The SE125 mountings have a cast iron cover and base with 4 mounting holes in the base and a central tapped hole in the cover.

This range of mountings has one or two steel mounting plates depending on the model, one or several high strength steel springs, 2 light alloy rings and a stainless steel wire cushion in each spring.