HUTCHINSON Paulstra

Standard SE121 mountings have a cast steel base and a resilient element made from a stainless steel wire cushion.

The SE127 damper has a satin finish treated AG3 casing and mounting plate, a stainless steel centre axis. A spring and stainless steel cushion provide the resilient elements.

The SE131 mountings steel have a mounting plate, cover and swaged teel shaft. This mouting is available with stainless steel or mild steel zinc plated metalwork. The resilient parts are stainless steel wire cushions. The steel parts are zinc plated.

Machine mount available with a stud or threaded hole. Top cup and stud are mild steel zinc plated. Stainless steel wire mesh cushion. Natural frequency between 15 to 20 Hz.

The SE124 dampers have a cover, an AG3 mounting plate and an AU4G shaft. The assembly is chromatised. The upper and lower stainless steel cushions are the resilient elements of the mounting. It has four Ø 8 mounting holes on the mounting plate and one M10 tapped hole on the upper cover.

The SE125 mountings have a cast iron cover and base with 4 mounting holes in the base and a central tapped hole in the cover.

The SE126 range has a pressed steel casing and mounting plate and light alloy shaft. The resilient element is a stainless steel wire pad.

This range of mountings has one or two steel mounting plates depending on the model, one or several high strength steel springs, 2 light alloy rings and a stainless steel wire cushion in each spring.

All metal mounting comprising a stack of between one and three woven steel cushions giving a variation in natural frequency depending upon the number of cushions. This makes higher levels of isolation possible.

This suspension system is particularly suitable for mounting exhaust pipes from generator sets on board ship or permanently mounted in buildings.

The SE150 coupling is designed with the following features : Push fit assembly Compact, smooth cylindrical shape without protrusions The flexible element is precompressed during assembly, which extends the range of operating conditions where the rubber is not subject to tension

The SE150 coupling is designed with the following features : Push fit assembly Compact, smooth cylindrical shape without protrusions The flexible element is precompressed during assembly, which extends the range of operating conditions where the rubber is not subject to tension

There are two variations of the SE151 coupling : hollow hub and solid hub : Flexible element : Formed of solid natural rubber ­External steel surround, bonded to the rubber

Flexible element : Metallic bobbins linked together by rayon fibres ­The whole unit is potted in natural rubber and is hexagonal

Flexible element : Precompressed natural rubber ­Bonded metal reinforcing mountings Precompression band (to be removed after installation)

Flexible element made up of a variable number of flexible studs depending on the torque to be transmitted : ­Solid natural rubber blocks in the form of a truncated cone Internal armature bonded to the rubber

Round silicone rope Food quality Color : grey Hardness : 60 Shores A